Formation and control of toxic polychlorinated compounds during incineration of wastes containing polychlorinated naphthalenes

To estimate the potential impact on municipal solid waste (MSW) incinerator toxic equivalent (TEQ) emissions of treating wastes containing polychlorinated naphthalenes (PCNs), pilot-scale thermal treatment experiments were conducted. MSW (run 1) and MSW fortified with synthetic rubber belts containing PCNs (runs 2 and 3) were incinerated. Flue-gas and ash samples were analyzed for polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), coplanar polychlorinated biphenyls (co-PCBs), and PCNs. Final exhaust-gas WHO-TEQ emissions were all less than 0.1 ng/Nm3. Flue-gas TEQs were mainly from PCDFs (58-74%). When 2,3,7,8-tetrachlorodibenzo-p-dioxin relative potency factors (REPs) of specific PCN congeners from previous reports were used as estimated toxic equivalency factors to compute estimated PCN TEQs and total TEQs along with PCDDs, PCDFs, and co-PCBs, the contributions of PCNs to the total TEQs were small in ash samples and up to 28% in final exhaust gas. The TEQs in primary combustion flue gases increased through the formation of dioxins and PCNs and then decreased via secondary combustion, fabric filtration, and activated carbon adsorption. From this pilot-scale study, the incremental impact of incinerating PCN-containing wastes on annual TEQ emissions in Japan is estimated as 0.27 g of total TEQ.     

A new method using a health index (HI) to screen low level toxic organic substances in consumer products

To ensure selection of appropriate materials for industrial use in terms of toxicity, a procedure to estimate a health index (HI) that can be used for prioritizing less hazardous components of consumer products is described. The HI is based on the occupational exposure limits (OELs) of organic substances that compose the products. To calculate the HI of a product, it is often necessary to predict OEL values for the substances for which an OEL value has not yet been promulgated. We developed a method to estimate the OEL values from median lethal dose (LD50) data of rodent. A good correlation between known OEL values and the LD50 data was obtained by a multivariate regression analysis by introducing organic compensation coefficients, which were caluculated as 10 to the Bth power where B is the regression coefficient of dummy variables denoting the characteristics of the organic compounds such as functional groups, molecular structures, and so on. We believe that the use of the present method should be limited to predicting unknown OEL values for the HI and used for material prioritization. It should not be extended to determinations of regulatory OELs.     

Mechanisms behind tailing in the pressure inactivation curve of a clinical isolate of Escherichia coli O157:H7

The tailing in pressure inactivation curve of clinically isolated Escherichia coli O157:H7 was investigated. A typical tailing was observed after the treatment period for 30min when 10(7) CFU/ml of the cell suspension was subjected to pressure treatment at 300MPa and 25 degrees Celsius. There was no effect on the tailing profiles by the addition of pressure-killed cells and released cellular components. When cells survived at a tail portion were re-propagated (tail-culture) and subjected to second pressure treatment, the cells of the tail-culture exhibited eminently higher barotolerance compared to those of the original-culture, suggesting that the presence of genetically pressure-resistant subpopulation was responsible for the tailing. The cytoplasmic membrane of the tail-culture cells had higher stability to a pressure treatment at 100MPa for 10min than that of the original-culture, which was evidenced by lower permeability to ethidium bromide. The addition of non-ionic surfactants including 0.5microl/ml polyoxyethylene p-t-octylphenyl ester (Triton X-100) and 0.53mg/ml lauric sugar ester dramatically reduced the level of tailing and made the inactivation curve linear.     

Design of a virtual human presenter

We have created a virtual human presenter who accepts speech texts with embedded commands as inputs. The presenter acts in real-time 3D animation synchronized with speech. The system was developed on the Jack animated-agent system. Jack provides a 3D graphical environment for controlling articulated figures, including detailed human models     

Selective adsorption of precious metals from hydrochloric acid solutions using porous carbon prepared from barley straw and rice husk

Porous carbon was prepared by carbonization from agro-waste such as rice husk and barley straw to evaluate the adsorption of precious and base metals from metal solutions. The effects of hydrochloric acid concentration, metal ion concentration, and contact time on adsorption were examined. Rice husk carbon was found to be highly selective for Au(III) and inert to Pt(IV), Pd(II) and other base metals. Barley straw carbon adsorbed these three precious metal ions, but was inert to base metal ions such as Cu(II), Fe(III) and Ni(II). The maximum adsorption capacity of rice husk carbon for Au(III) was 0.76 mol/kg and the maximum adsorption capacity of barley straw carbon for Au(III), Pt(IV) and Pd(II) was 1.47, 0.39 and 0.64 mol/kg, respectively. The effectiveness of recovery of precious metals from industrial solution was also tested and barley straw carbon was found to be highly efficient and selective for the targeted metal ions in the presence of excess of other metal ions. Rice husk and barley straw carbon are thus potential alternatives to commercially available activated carbon as they have high selectivity and are efficient with low production costs.     

Embedded ferroelectric memory technology with completely encapsulated hydrogen barrier structure

A 0.18-/spl mu/m system LSI embedded ferroelectric memory (FeRAM) operating at a very low voltage has been developed for the first time. The low-voltage operation has been attained by newly developed stacked ferroelectric capacitors completely encapsulated by hydrogen barriers, which enable us to eliminate hydrogen reduction of the ferroelectric thin film during the back end of the line process including FSG, tungsten CVD (W-CVD), and plasma CVD SiN (p-SiN) passivation. A fabricated 1-Mbit one-transistor one-capacitor SrBi/sub 2/(Ta/sub x/Nb/sub 1-x/)/sub 2/O/sub 9/ (SBTN)-based embedded FeRAM operates at a low voltage of 1.1 V and ensures the endurance cycles up to 10/sup 12/ at 85/spl deg/C and the data retention time up to 1000 h at 125/spl deg/C, which is the most promising for mass production of 0.18-/spl mu/m low-power system LSI-embedded FeRAM and beyond.     

Advanced damage-free neutral beam etching technology to texture Si wafer with honeycomb pattern for broadband light trapping in photovoltaics

Journal of Materials Science: Materials in Electronics - We introduce a new innovative damage-free neutral beam etching (NBE) technique to transfer a honeycomb resist pattern to silicon (Si) wafer...     

Characterization of overoxidized polypyrrole colloids imprinted with L-lactate and their application to enantioseparation of amino acids

Overoxidized polypyrrole colloids imprinted with L-lactate were prepared to evaluate the performance of the overoxidation pseudo-template technique developed by the authors. A polypyrrole colloid that had been prepared from a mixture of monomer (pyrrole), dopant (L-lactate), steric stabilizer (poly(vinylpyrrolidone)) and oxidizing agent (peroxodisulfate) was electrochemically overoxidized at +1.5 V vs Ag/AgCl to create a complementary cavity for recognition of the molecules, which were structurally similar to dopant, through dedoping. As a target molecule for enantioselective uptake into the overoxidized colloid, we selected alanine, which is structurally different from the template (lactate) only in one side chain (alanine, -NH2; lactic acid, -OH). The overoxidized polypyrrole colloid showed higher affinity for L-alanine than for D-alanine, and an uptake ratio (L/D) of as high as 11 +/- 4 was observed under optimum conditions. Uptake reached equilibrium in 10 min, thanks to the high surface area and short diffusion length in the colloidal particle. Further, to confirm the complementarity of the cavity, the effect of side chain size on uptake of several alpha-amino acids was examined to indicate that the uptake amount decreased with increasing molecular volume of the L-amino acids.     

Effects of obesity and inheritance on the development of non-insulin-dependent diabetes mellitus in Otsuka-Long-Evans-Tokushima fatty rats

Schistosomiasis constitutes one of the major endemic diseases in both African and Asian countries. There are numerous strains of Schistosoma mansoni. Although there is similarity between their life cycles, yet there are many differences in the morphology of the adult worms, their pathogenecity, their infectivity and their ultrastructural features. This study was performed on albino mice infected with both Egyptian and Saudi strains, to investigate the characteristic differences between them. It was found that at the eight week post-infection, the highest amount of egg deposition and granuloma formation was present in the liver of infected mice with the Egyptian strain; while it was highest in the small intestine of those infected with the Saudi strain, followed by the liver and the large intestine. Although no prominent histopathologic differences were detected in the cellular and tissue reactions in the resulting granulomata surrounding eggs, yet marked differences were observed in the surface topography of the tegument and distribution of papillae, pattern of ridges, microvilli, and spines of both strains. These differences were more pronounced in males. It might be concluded from this study that such differences are due to strain variation, biological and morphological characteristics of Schistosoma mansoni, and could be considered as a baseline for further experimental studies.